We will match any dealers advertised prices!

Installation Machines


LF 1000/2000LN
HAND HELD PINSPOTTER

The LF is a portable unit (9 lbs.) that welds 14 gauge PN style pins to ductwork up to 22 gauge. Insert PN Pin into the magnetic tip and depress the trigger. A timed burst of electricity fuses the pin to the steel. It can also weld LN style pins up to 5-1/2” long with the use of a TPL2 tip purchased separately. Available in 110v & 220v, 50 to 60hz; fuse for 15 amps.

ITEM #27003 - 110 VOLT
ITEM #27004 - 220 VOLT



MF-12
COMPACT PINSPOTTER

(For use with 1/2", 3/4" & 1" weld pins)

The MF-12 welds BDEP, CTC, SSP, CP, FTC, PN or LN type fasteners to ductwork up to 24 Gauge. It requires 220 Volt, 50 to 60 hz service fused for 30 Amps. Place a pin on the magnetic tip. Insert the pin through the insulation, give the pin a 1/4 twist, and depress the trigger switch. For LN type fasteners use a TPL2 tip. For PN type fasteners use a TP2 tip.

ITEM #27115



PBF-510
HEAVY DUTY PINSPOTTER

(For use with 1/2" to 2" weld pins)

The PBF-510 welds BDEP, CTC, SSP, CP, FTC, PN or LN type fasteners to ductwork up to 18 gauge. It requires 220 Volt, 50 to 60 hz service fused for 100 Amps. Place a pin on the magnetic tip, insert the pin through the insulation, give the pin a 1/4 twist and depress the trigger switch. For LN type fasteners use a TPL2 tip. For PN type fasteners use a TP2 tip.

ITEM #27372

 



FG MACH I & II
AUTOMATIC BULK FEED PINSPOTTER
WITH FIVE FOOT THROAT

The FG MACH I & II welds BDEP, CTC, SSP, CP & FTC type fasteners. The FG MACH I can weld to ductwork up to 20 gauge. It requires 220v, 50 to 60hz; service fused for 30 amps. The FG MACH II can weld to ductwork up to 18 gauge. It requires 220v, 50 to 60hz service, fused for 100 amps. A source of 85 P.S.I. air is required for both. Footswitch actuated, fasteners are inserted through the insulation and welded in place.

ITEM #18001 - MACH I
ITEM #18002 - MACH II

 



RH MACH II
ROLLING HEAD AUTOMATIC PINSPOTTER

RH MACH II welds BDEP, CTC, SSP, CP & FTC type fasteners to ductwork up to 18 gauge. It requires 220v, 50 to 60hz service, fused for 100 amps. A source of 85 P.S.I. air is required. Position a fastener over the insulation and depress the trigger switch. The machine inserts the fastener through the insulation and welds it to the steel.

ITEM #18010

 



AB-5
AUTOMATIC BANGER SETTER

(For use with 1/2" to 1-1/2" tripod or standard bangers)

The AB-5 installs Banger Type Fasteners (Tripod & Standard) in ductwork 26 to 18 gauge. It requires 110 Volt, 50 to 60 hz service fused for 15 Amps. A source of 85 P.S.I. air is required. The footswitch is depressed, and the machine inserts a fastener through the insulation and into the steel.

ITEM #17297